{"title":"Sub Ohm Coils","description":"\u003cp\u003eSub-ohm replacement coils for direct-to-lung vaping, delivering big vapour and intense flavour at higher wattages. Coils are a consumable part, replacing them regularly keeps your flavour fresh and prevents burnt hits.\u003c\/p\u003e\u003cp\u003eFind the right coil for your device in our full \u003ca href=\"\/collections\/coils-cartridges\"\u003epods \u0026amp; coils\u003c\/a\u003e range.\u003c\/p\u003e","products":[{"product_id":"oxva-unione-replacement-coils-pack-of-5","title":"OXVA Unione Replacement Coils (Pack of 5)","description":"\u003cp\u003eKeep a compatible setup performing correctly with OXVA Unione Replacement Coils, made for the OXVA Unibox PnM kit and Unione coil platform. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 5 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: 0.15Ω, 0.3Ω\u003c\/li\u003e\n\u003cli\u003eCompatibility: The OXVA Unibox PnM kit and Unione coil platform\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003cli\u003eMesh construction where stated for the selected option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e0.15Ω: 70–80W\u003c\/li\u003e\n\u003cli\u003e0.3Ω: 35–40W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThese low-resistance options are intended for airier direct-to-lung (DTL) use. Pair them with a lower-nicotine, higher-VG e-liquid and follow the wattage range printed on the coil.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e5 × OXVA Unione Replacement Coils in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"OXVA","offers":[{"title":"0.15 Ohms","offer_id":59909898502478,"sku":"OXVA-UNIONE-COILS-5PK-0.15OHMS","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"0.3 Ohms","offer_id":59909898535246,"sku":"OXVA-UNIONE-COILS-5PK-0.3OHMS","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/oxva-unione-replacement-coils-pack-of-5-015ohms_987046c1-1929-4cce-8650-305d88e2628a.jpg?v=1781714003"},{"product_id":"smok-nord-pro-replacement-coils-pack-of-3","title":"SMOK Nord Pro Replacement Coils (Pack of 5)","description":"\u003cp\u003eSMOK Nord Pro Replacement Coils are replacement coils for the SMOK Nord Pro pod kit. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 5 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: 0.9Ω, 0.6Ω\u003c\/li\u003e\n\u003cli\u003eCompatibility: The SMOK Nord Pro pod kit\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e0.6Ω DL option: rated at 20W\u003c\/li\u003e\n\u003cli\u003e0.9Ω MTL option: rated at 15W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThe lower-resistance option gives a warmer, airier draw, while the higher-resistance option provides a tighter vape at lower power. Use 50VG\/50PG liquid for MTL options and follow the device guidance before using higher-VG liquid. Browse \u003ca href=\"\/collections\/nic-salts\"\u003enic salt e-liquids\u003c\/a\u003e for suitable lower-powered setups.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e5 × SMOK Nord Pro Replacement Coils in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"SMOK","offers":[{"title":"0.9 Ohms","offer_id":59909898568014,"sku":"SMOK-NORD-PRO-COILS-5PK-MSH-0.9OHMS","price":9.49,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohms","offer_id":59909898600782,"sku":"SMOK-NORD-PRO-COILS-5PK-MSH-0.6OHMS","price":9.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/smok-nord-pro-replacement-09ohms-coils-pack-of-5_1ffbbda0-f399-415b-a7ba-067acdc84d04.png?v=1784924550"},{"product_id":"uwell-crown-5-replacement-coils-pack-of-4","title":"Uwell Crown 5 Replacement Coils (Pack of 4)","description":"\u003cp\u003eThis pack of 4 coils is intended for the Uwell Crown 5 tank and lets you replace a worn coil without replacing the complete tank or pod. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 4 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: Single mesh 0.23Ω, Dual mesh 0.3Ω\u003c\/li\u003e\n\u003cli\u003eCompatibility: The Uwell Crown 5 tank\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003cli\u003eMesh construction where stated for the selected option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e0.23Ω single mesh: 65–70W\u003c\/li\u003e\n\u003cli\u003e0.3Ω dual mesh: 50–55W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThese low-resistance options are intended for airier direct-to-lung (DTL) use. Pair them with a lower-nicotine, higher-VG e-liquid and follow the wattage range printed on the coil.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e4 × Uwell Crown 5 Replacement Coils in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"Uwell","offers":[{"title":"Single Mesh 0.23 Ohms","offer_id":59909900108110,"sku":"UWELL-CROWN5-COILS-UN2-4PK-0.23OHMS","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"Dual Mesh 0.3 Ohms","offer_id":59909900140878,"sku":"UWELL-CROWN5-COILS-UN2-2-4PK-0.3OHMS","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/uwell-crown-5-replacement-coils-pack-of-4-un2-single-mesh_e87f64ba-0b77-4934-a8c4-806566b1a430.jpg?v=1784925105"},{"product_id":"freemax-904l-m-mesh-coils","title":"FreeMax 904L M Mesh Coils (Pack Of 3)","description":"\u003cp\u003eKeep a compatible setup performing correctly with FreeMax 904L M Mesh Coils, made for the FreeMax M Pro 2 tank. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 3 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: M2 0.2Ω mesh coil\u003c\/li\u003e\n\u003cli\u003eCompatibility: The FreeMax M Pro 2 tank\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003cli\u003eMesh construction where stated for the selected option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eM2 0.2Ω option for DTL use with the M Pro 2 tank\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThese low-resistance options are intended for airier direct-to-lung (DTL) use. Pair them with a lower-nicotine, higher-VG e-liquid and follow the wattage range printed on the coil.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e3 × FreeMax 904L M Mesh Coils in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"Freemax","offers":[{"title":"M2 0.2 Ohms","offer_id":59909904400718,"sku":"FREEMAX-MESH-COILS-M2-3PK-0.2OHMS","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/freemax-mesh-coils-m3-pack-of-3_0dbf58ed-0bc9-4bee-9ee1-5cd432197579.jpg?v=1784926479"},{"product_id":"aspire-odan-0-2ohm-mesh-coils-pack-of-3","title":"Aspire Odan Mesh Coils (Pack of 3)","description":"\u003cp\u003eThis pack of 3 coils is intended for Aspire Odan and Odan Mini tanks and lets you replace a worn coil without replacing the complete tank or pod. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 3 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: 0.2Ω, 0.3Ω, 0.18Ω\u003c\/li\u003e\n\u003cli\u003eCompatibility: Aspire Odan and Odan Mini tanks\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003cli\u003eMesh construction where stated for the selected option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e0.18Ω, 0.2Ω and 0.3Ω options are DTL mesh coils; use the range printed on the selected coil\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThese low-resistance options are intended for airier direct-to-lung (DTL) use. Pair them with a lower-nicotine, higher-VG e-liquid and follow the wattage range printed on the coil.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e3 × Aspire Odan Mesh Coils in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"Aspire","offers":[{"title":"0.2Ohms","offer_id":59909913674062,"sku":"ASPIRE-ODAN-MESH-COILS-3PK-0.2OHMS","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"0.3Ohms","offer_id":59909913706830,"sku":"ASPIRE-ODAN-MESH-COILS-3PK-0.3OHMS","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"0.18Ohms","offer_id":59909913739598,"sku":"ASPIRE-ODAN-MESH-COILS-3PK-0.18OHMS","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/aspire-odan-mesh-coils-3-pack_641b2e12-8347-469d-adb6-0836704c653e.jpg?v=1784929787"},{"product_id":"uwell-whirl-s2-replacement-coils-pack-of-4","title":"Uwell Whirl S2 Replacement Coils (Pack of 4)","description":"\u003cp\u003eKeep a compatible setup performing correctly with Uwell Whirl S2 Replacement Coils, made for the Uwell Whirl S2 kit and Whirl S2 pod. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 4 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: 1.2Ω, 0.8Ω\u003c\/li\u003e\n\u003cli\u003eCompatibility: The Uwell Whirl S2 kit and Whirl S2 pod\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003cli\u003eMesh construction where stated for the selected option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e0.8Ω: looser MTL\/RDTL draw with balanced e-liquid\u003c\/li\u003e\n\u003cli\u003e1.2Ω: tighter MTL draw with 50VG\/50PG e-liquid\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUwell Pro-FOCS technology is used in the Whirl S2 coil platform.\u003c\/p\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThe lower-resistance option gives a warmer, airier draw, while the higher-resistance option provides a tighter vape at lower power. Use 50VG\/50PG liquid for MTL options and follow the device guidance before using higher-VG liquid. Browse \u003ca href=\"\/collections\/nic-salts\"\u003enic salt e-liquids\u003c\/a\u003e for suitable lower-powered setups.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e4 × Uwell Whirl S2 Replacement Coils in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"Uwell","offers":[{"title":"1.2 Ohms","offer_id":59909917770062,"sku":"UWELL-WHIRL-S2-COILS-4PK-1.2OHMS","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohms","offer_id":59909917802830,"sku":"UWELL-WHIRL-S2-COILS-4PK-0.8OHMS","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/uwell-whirl-s2-replacement-coils-pack-of-4_e18b7e75-73a1-497f-b454-a92b82f88db0.png?v=1784930652"},{"product_id":"geekvape-supermesh-coils-x1-x2-pack-of-5","title":"Geekvape Supermesh Coils X1 \u0026 X2 (Pack of 5)","description":"\u003cp\u003eGeekvape Supermesh Coils X1 \u0026amp; X2 are replacement coils for the Geekvape Cerberus sub-ohm tank. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 5 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: X1 0.2Ω, New X2 0.4Ω\u003c\/li\u003e\n\u003cli\u003eCompatibility: The Geekvape Cerberus sub-ohm tank\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003cli\u003eMesh construction where stated for the selected option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eX1 0.2Ω: 60–70W\u003c\/li\u003e\n\u003cli\u003eX2 0.4Ω: 50–60W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThese low-resistance options are intended for airier direct-to-lung (DTL) use. Pair them with a lower-nicotine, higher-VG e-liquid and follow the wattage range printed on the coil.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e5 × Geekvape Supermesh Coils X1 \u0026amp; X2 in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"Geekvape","offers":[{"title":"X1 0.2 Ohms","offer_id":59909918523726,"sku":"GEEKVAPE-SMESH-X1-0.2OHMS","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"New X2 0.4 Ohms","offer_id":59909918556494,"sku":"GEEKVAPE-SMESH-NEW-X2-0.4OHMS","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/Geekvape-Supermesh-Coils-X1-_Pack-of-5_bdaadd50-79a3-4409-8717-b1a965d7bccc.jpg?v=1784930813"},{"product_id":"vaporesso-gt-ccell-replacement-coils","title":"Vaporesso GT CCELL Coils (Pack of 3)","description":"\u003cp\u003eThis pack of 3 coils is intended for selected Vaporesso NRG, NRG Mini, NRG SE, Cascade Baby and Cascade Mini tanks and lets you replace a worn coil without replacing the complete tank or pod. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 3 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: 0.5Ω CCELL\u003c\/li\u003e\n\u003cli\u003eCompatibility: Selected Vaporesso NRG, NRG Mini, NRG SE, Cascade Baby and Cascade Mini tanks\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eThe current Shopify variant is 0.5Ω CCELL. This corrects the old description, which referred to a different resistance\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThe lower-resistance option gives a warmer, airier draw, while the higher-resistance option provides a tighter vape at lower power. Use 50VG\/50PG liquid for MTL options and follow the device guidance before using higher-VG liquid. Browse \u003ca href=\"\/collections\/nic-salts\"\u003enic salt e-liquids\u003c\/a\u003e for suitable lower-powered setups.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e3 × Vaporesso GT CCELL Coils in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"Vaporesso","offers":[{"title":"0.5 Ohms CCELL","offer_id":59909919146318,"sku":"VAPORESSO-GT-CCELL2-COILS-3PK-0.5OHMS","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/VAPORESSO-GT-CCELL-2-COILS-_PACK-OF-3_d56def31-7f20-476c-a0ab-4c6e50277101.jpg?v=1784930918"},{"product_id":"smok-rpm-4-replacement-coils-pack-of-5","title":"SMOK RPM 4 Replacement Coils (Pack of 5)","description":"\u003cp\u003eKeep a compatible setup performing correctly with SMOK RPM 4 Replacement Coils, made for SMOK RPM 4 pods and other pods designed for the LP2 coil platform. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 5 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: RESISTANCE: LP2 DC 0.6Ω, LP2 mesh 0.23Ω\u003c\/li\u003e\n\u003cli\u003eCompatibility: SMOK RPM 4 pods and other pods designed for the LP2 coil platform\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003cli\u003eMesh construction where stated for the selected option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLP2 0.23Ω mesh: 20–45W DTL\u003c\/li\u003e\n\u003cli\u003eLP2 0.6Ω dual coil: lower-powered, tighter output; follow the printed range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThe lower-resistance option gives a warmer, airier draw, while the higher-resistance option provides a tighter vape at lower power. Use 50VG\/50PG liquid for MTL options and follow the device guidance before using higher-VG liquid. Browse \u003ca href=\"\/collections\/nic-salts\"\u003enic salt e-liquids\u003c\/a\u003e for suitable lower-powered setups.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e5 × SMOK RPM 4 Replacement Coils in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"SMOK","offers":[{"title":"LP2 DC 0.6 Ohms","offer_id":59909919932750,"sku":"SMOK-RPM-4-COILS-LP2-5PK-0.6OHMS","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"LP2 Mesh 0.23 Ohms","offer_id":59909919965518,"sku":"SMOK-RPM-4-COILS-LP2-5PK-0.23OHMS","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/smok-rpm-4-coils-lp2-dc-06-ohms-pack-of-5_4d72d9a8-39ef-4d96-aeb7-e61a8f2cfc2c.png?v=1784931157"},{"product_id":"vaporesso-gt-mesh-replacement-coils-pack-of-3","title":"Vaporesso GT Mesh Coils (Pack of 3)","description":"\u003cp\u003eVaporesso GT Mesh Coils are replacement coils for Vaporesso tanks that accept the GT Core platform, including selected NRG-family tanks. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 3 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: 0.18Ω GT mesh coil\u003c\/li\u003e\n\u003cli\u003eCompatibility: Vaporesso tanks that accept the GT Core platform, including selected NRG-family tanks\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003cli\u003eMesh construction where stated for the selected option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e0.18Ω mesh option for DTL use; follow the printed range on the coil and tank\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThese low-resistance options are intended for airier direct-to-lung (DTL) use. Pair them with a lower-nicotine, higher-VG e-liquid and follow the wattage range printed on the coil.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e3 × Vaporesso GT Mesh Coils in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"Vaporesso","offers":[{"title":"Default Title","offer_id":59909923963214,"sku":"VAPORESSO-GTMESH-COILS-3PK-0.18OHMS","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/VAPORESSO-GT-MESH-COILS-_PACK-OF-3_16bed5bd-687b-4403-a188-34ab960eb112.jpg?v=1784931709"},{"product_id":"smok-tfv8-baby-coils-v8-baby-x4-pack-of-5","title":"SMOK TFV8 Baby V8 Baby-X4 Coils (Pack of 5)","description":"\u003cp\u003eThis pack of 5 coils is intended for the SMOK TFV8 Baby and TFV8 Big Baby Beast tanks and lets you replace a worn coil without replacing the complete tank or pod. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 5 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: 0.15\u003c\/li\u003e\n\u003cli\u003eCompatibility: The SMOK TFV8 Baby and TFV8 Big Baby Beast tanks\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e0.15Ω X4: 30–70W; recommended 45–60W\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eUse the e-liquid type recommended for the compatible device and selected coil. Start at the lowest printed wattage and increase gradually.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e5 × SMOK TFV8 Baby V8 Baby-X4 Coils in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"SMOK","offers":[{"title":"0.15","offer_id":59909929206094,"sku":"SMOK-TFV8-V8X4-5PK-0.15OHMS","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/smok-baby-x4-coils_9ac80f3a-5212-4aad-96c2-ade2ee8c0df5.jpg?v=1784932420"},{"product_id":"uwell-valyrian-2-replacement-coils-pack-of-2","title":"Uwell Valyrian 2 Replacement Coils (Pack of 2)","description":"\u003cp\u003eKeep a compatible setup performing correctly with Uwell Valyrian 2 Replacement Coils, made for the Uwell Valyrian 2 and Valyrian 2 Pro tanks. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 2 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: Quad 0.15Ω, Dual mesh 0.14Ω\u003c\/li\u003e\n\u003cli\u003eCompatibility: The Uwell Valyrian 2 and Valyrian 2 Pro tanks\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003cli\u003eMesh construction where stated for the selected option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e0.14Ω dual mesh and 0.15Ω quad options are high-power DTL coils; use the range printed on the coil\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eUwell Pro-FOCS flavour technology is part of the Valyrian 2 coil platform.\u003c\/p\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThese low-resistance options are intended for airier direct-to-lung (DTL) use. Pair them with a lower-nicotine, higher-VG e-liquid and follow the wattage range printed on the coil.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2 × Uwell Valyrian 2 Replacement Coils in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"Uwell","offers":[{"title":"Quad 0.15 Ohms","offer_id":59909929402702,"sku":"UWELL-VALYRIAN-COILS-5PK-QUAD-0.15OHMS","price":11.99,"currency_code":"GBP","in_stock":true},{"title":"Dual Mesh 0.14 Ohms","offer_id":59909929435470,"sku":"UWELL-VALYRIAN-COILS-5PK-DM-0.14OHMS","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/uwell-valyrian-coils-pack-of-2-quad-0_15ohms_18fb982a-297c-4009-a080-0025c2ac6b04.jpg?v=1784932494"},{"product_id":"ultra-boost-pro-coils-by-lost-vape-pack-of-5","title":"Ultra Boost Pro Replacement Coils by Lost Vape (Pack of 3)","description":"\u003cp\u003eUltra Boost Pro Replacement Coils by Lost Vape are replacement coils for the Lost Vape Ursa Quest Multi kit and UB Pro pod platform. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 3 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: P3 0.3Ω\u003c\/li\u003e\n\u003cli\u003eCompatibility: The Lost Vape Ursa Quest Multi kit and UB Pro pod platform\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003cli\u003eMesh construction where stated for the selected option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eP3 0.3Ω SS904 option: sub-ohm use; follow the printed wattage range and compatible temperature-control instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThese low-resistance options are intended for airier direct-to-lung (DTL) use. Pair them with a lower-nicotine, higher-VG e-liquid and follow the wattage range printed on the coil.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e3 × Ultra Boost Pro Replacement Coils by Lost Vape in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"Lost Vape","offers":[{"title":"P3 0.3 Ohms","offer_id":59909930025294,"sku":"LOSTVAPE-UB-COILS-3PK-PRO-P3-0.30HMS","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/lost-vape-ultra-boost-pro-coils-pack-of-3_c563ee7b-0848-48c7-af04-11030f1154cb.jpg?v=1781714182"},{"product_id":"smok-v8-baby-replacement-q2-coils-pack-of-5","title":"SMOK TFV8 Baby-Q2 Coils (Pack of 5)","description":"\u003cp\u003eThis pack of 5 coils is intended for the SMOK TFV8 Baby and TFV8 Big Baby Beast tanks and lets you replace a worn coil without replacing the complete tank or pod. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 5 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: 0.4Ω\u003c\/li\u003e\n\u003cli\u003eCompatibility: The SMOK TFV8 Baby and TFV8 Big Baby Beast tanks\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e0.4Ω Q2: rated 40–80W; begin near the lower end of the printed range\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThese low-resistance options are intended for airier direct-to-lung (DTL) use. Pair them with a lower-nicotine, higher-VG e-liquid and follow the wattage range printed on the coil.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e5 × SMOK TFV8 Baby-Q2 Coils in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"SMOK","offers":[{"title":"0.4 Ohms","offer_id":59909936775502,"sku":"SMOK-V8BABY-Q2COILS-0.4OHM","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/smok-baby-q2-coils_a8de2868-ad2c-4dc2-b7db-d3eefc387938.jpg?v=1784933141"},{"product_id":"voopoo-drag-6-kit","title":"VooPoo Drag 6 Kit","description":"\u003cp\u003eThe VooPoo Drag 6 is a high-output box-mod kit with a 4400mAh built-in dual-battery system and adjustable power up to 220W. Supplied with the 2ml UFORCE-X Tank II and two PnP X coils, it is aimed at experienced DTL and RDTL customers who want precise control without removable battery cells.\u003c\/p\u003e\n\u003ch2\u003eVooPoo Drag 6 features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e4400mAh total built-in battery capacity\u003c\/li\u003e\n\u003cli\u003eAdjustable 5–220W output\u003c\/li\u003e\n\u003cli\u003eGENE.TT 3.0 chipset\u003c\/li\u003e\n\u003cli\u003e1.66-inch TFT colour screen\u003c\/li\u003e\n\u003cli\u003ePrecision control wheel\u003c\/li\u003e\n\u003cli\u003eCapacitive unlock sensor\u003c\/li\u003e\n\u003cli\u003eSmart, RBA and TC-TRC modes\u003c\/li\u003e\n\u003cli\u003e2ml UFORCE-X Tank II\u003c\/li\u003e\n\u003cli\u003eTop-filling design and adjustable airflow\u003c\/li\u003e\n\u003cli\u003e0.15Ω and 0.3Ω PnP X coils included\u003c\/li\u003e\n\u003cli\u003eUSB-C 5V\/3A charging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUFORCE-X Tank II and PnP X coils\u003c\/h2\u003e\n\u003cp\u003eThe included 0.15Ω coil is rated for 60–80W and delivers an open DTL draw. The 0.3Ω coil operates at 32–40W for DTL or RDTL use. Pair the supplied setup with 50–70% VG liquid, including high-VG \u003ca href=\"\/collections\/shortfill-e-liquids\"\u003eshortfill e-liquids\u003c\/a\u003e at the upper outputs. The UFORCE-X Tank II uses the PnP X platform, allowing other compatible resistances where the selected coil, liquid and power setting are properly matched.\u003c\/p\u003e\n\u003ch2\u003eControls, modes and refilling\u003c\/h2\u003e\n\u003cp\u003eThe precision wheel provides quick power and menu adjustment, while the capacitive sensor unlocks the controls when held. Smart mode suggests a suitable power range for the coil; RBA mode gives manual control and TC-TRC supports compatible temperature-control wire. Refill through the tank’s top port and prime a fresh coil before use. The built-in battery charges through USB-C at up to 5V\/3A with a suitable power source.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOutput power: 5–220W\u003c\/li\u003e\n\u003cli\u003eBattery: 2 x 2200mAh built-in cells, 4400mAh total\u003c\/li\u003e\n\u003cli\u003eDisplay: 1.66-inch TFT\u003c\/li\u003e\n\u003cli\u003eTank capacity: 2ml\u003c\/li\u003e\n\u003cli\u003eTank connection: 510\u003c\/li\u003e\n\u003cli\u003eResistance range: 0.05–3.0Ω\u003c\/li\u003e\n\u003cli\u003eCharging: USB-C, 5V\/3A\u003c\/li\u003e\n\u003cli\u003eDevice material: zinc alloy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse the \u003ca href=\"\/collections\/voopoo\"\u003eVooPoo range\u003c\/a\u003e, find compatible \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement pods and coils\u003c\/a\u003e or choose \u003ca href=\"\/collections\/e-liquids\"\u003ee-liquids\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat is included?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x VooPoo Drag 6 device\u003c\/li\u003e\n\u003cli\u003e1 x 2ml UFORCE-X Tank II\u003c\/li\u003e\n\u003cli\u003e1 x PnP X 0.15Ω coil\u003c\/li\u003e\n\u003cli\u003e1 x PnP X 0.3Ω coil\u003c\/li\u003e\n\u003cli\u003e1 x PnP X platform card\u003c\/li\u003e\n\u003cli\u003e1 x 2ml spare glass\u003c\/li\u003e\n\u003cli\u003e1 x silicone seal pack\u003c\/li\u003e\n\u003cli\u003e1 x USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 x user manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VooPoo","offers":[{"title":"Metal Grey","offer_id":59909955354958,"sku":"KITVPOGR6MGR1","price":47.99,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":59909955387726,"sku":"KITVPOGR6BLK1","price":47.99,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":59909955420494,"sku":"KITVPOGR6SLV1","price":47.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/voopoo_drag_6_kit_metal_grey_65d04065-94fc-4daf-ac72-e8f91edb9305.png?v=1784934911"},{"product_id":"oxva-xlim-ez-pods","title":"Oxva Xlim EZ Pods","description":"\u003cp\u003eThis replacement-pod option is made for compatible OXVA XLIM-series devices and keeps the filling and coil system matched to the correct device. Each pod has a 2ml capacity and uses a top-fill design. This product is a refillable pod with a built-in coil, so there is no separate coil to install.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3 replacement pods\u003c\/li\u003e\n\u003cli\u003e2ml e-liquid capacity\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: 0.6Ω, 0.8Ω, 1.2Ω, 0.4Ω\u003c\/li\u003e\n\u003cli\u003eTop-fill design\u003c\/li\u003e\n\u003cli\u003eA refillable pod with a built-in coil, so there is no separate coil to install\u003c\/li\u003e\n\u003cli\u003eCompatibility: Compatible OXVA XLIM-series devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eResistance and e-liquid guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.6Ω:\u003c\/strong\u003e balanced RDTL or loose mouth-to-lung (MTL) use with 50VG\/50PG e-liquid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.8Ω:\u003c\/strong\u003e MTL use with 50VG\/50PG e-liquid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.2Ω:\u003c\/strong\u003e a tighter MTL draw with 50VG\/50PG e-liquid or an appropriate nic salt strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.4Ω:\u003c\/strong\u003e airier restricted-direct-to-lung (RDTL) or DTL use; follow the device power guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor lower-powered MTL and RDTL pod options, a balanced 50VG\/50PG e-liquid is a reliable general starting point. Browse \u003ca href=\"\/collections\/nic-salts\"\u003enic salt e-liquids\u003c\/a\u003e and choose a nicotine strength suitable for the selected resistance and airflow.\u003c\/p\u003e\u003ch2\u003eFilling and replacement\u003c\/h2\u003e\u003cp\u003eOpen the top-fill port, fill to the 2ml limit and close the seal securely. With a new built-in coil or newly fitted replaceable coil, allow several minutes for the wick to saturate before vaping. Replace the complete pod when its built-in coil produces muted flavour, reduced vapour or a burnt taste.\u003c\/p\u003e\u003cp\u003eCheck the pod name and resistance carefully before ordering. Similar devices can use different cartridges. Browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement pods and cartridges\u003c\/a\u003e or compare \u003ca href=\"\/collections\/refillable-pod-kits\"\u003erefillable pod kits\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e3 × Oxva Xlim EZ Pods in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"OXVA","offers":[{"title":"0.6 Ohms","offer_id":59910044746062,"sku":"PODOXXLZ0.603","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohms","offer_id":59910044778830,"sku":"PODOXXLZ0.803","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"1.2 Ohms","offer_id":59910044811598,"sku":"PODOXXLZ1.203","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"0.4 Ohms","offer_id":59910044844366,"sku":"PODOXXLZ0.403","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/oxva-xlim-ez-pods-0.6_f28c69b1-05f3-4000-a5d6-44b7798534e6.png?v=1784955167"},{"product_id":"geekvape-j-pods","title":"Geekvape J Pods","description":"\u003cp\u003eReplace a worn or damaged cartridge with Geekvape J Pods, designed for Geekvape Digi Max and Digi Pro pod kits. Each pod has a 2ml capacity and uses a side-fill with top airflow control design. This product is a refillable pod with a built-in coil, so there is no separate coil to install.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e2 replacement pods\u003c\/li\u003e\n\u003cli\u003e2ml e-liquid capacity\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: 0.4Ω, 0.6Ω, 0.8Ω, 1.2Ω\u003c\/li\u003e\n\u003cli\u003eSide-fill with top airflow control design\u003c\/li\u003e\n\u003cli\u003eA refillable pod with a built-in coil, so there is no separate coil to install\u003c\/li\u003e\n\u003cli\u003eCompatibility: Geekvape Digi Max and Digi Pro pod kits\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eResistance and e-liquid guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.4Ω:\u003c\/strong\u003e airier restricted-direct-to-lung (RDTL) or DTL use; follow the device power guidance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.6Ω:\u003c\/strong\u003e balanced RDTL or loose mouth-to-lung (MTL) use with 50VG\/50PG e-liquid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.8Ω:\u003c\/strong\u003e MTL use with 50VG\/50PG e-liquid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.2Ω:\u003c\/strong\u003e a tighter MTL draw with 50VG\/50PG e-liquid or an appropriate nic salt strength.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe built-in mesh coil and adjustable top airflow allow the draw to be tuned within the selected resistance.\u003c\/p\u003e\u003cp\u003eFor lower-powered MTL and RDTL pod options, a balanced 50VG\/50PG e-liquid is a reliable general starting point. Browse \u003ca href=\"\/collections\/nic-salts\"\u003enic salt e-liquids\u003c\/a\u003e and choose a nicotine strength suitable for the selected resistance and airflow.\u003c\/p\u003e\u003ch2\u003eFilling and replacement\u003c\/h2\u003e\u003cp\u003eOpen the side-fill with top airflow control port, fill to the 2ml limit and close the seal securely. With a new built-in coil or newly fitted replaceable coil, allow several minutes for the wick to saturate before vaping. Replace the complete pod when its built-in coil produces muted flavour, reduced vapour or a burnt taste.\u003c\/p\u003e\u003cp\u003eCheck the pod name and resistance carefully before ordering. Similar devices can use different cartridges. Browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement pods and cartridges\u003c\/a\u003e or compare \u003ca href=\"\/collections\/refillable-pod-kits\"\u003erefillable pod kits\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2 × Geekvape J Pods in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"Geekvape","offers":[{"title":"0.4 Ohms","offer_id":59910063358286,"sku":"PODGKVPJ0.402","price":5.99,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohms","offer_id":59910063391054,"sku":"PODGKVPJ0.602","price":5.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohms","offer_id":59910063423822,"sku":"PODGKVPJ0.802","price":5.99,"currency_code":"GBP","in_stock":true},{"title":"1.2 Ohms","offer_id":59910063456590,"sku":"PODGKVPJ1.202","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/geekvape-digi-max-j-pods_c73f9ee5-d1cc-401e-8e0c-51bda74ce00e.png?v=1784958213"},{"product_id":"oxva-nexlim-pods","title":"OXVA NeXLIM Pods","description":"\u003cp\u003eThis replacement-pod option is made for OXVA NeXLIM-series devices and keeps the filling and coil system matched to the correct device. Each pod has a 2ml capacity and uses a top-fill design. This product is a refillable pod with a built-in coil, so there is no separate coil to install.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3 replacement pods\u003c\/li\u003e\n\u003cli\u003e2ml e-liquid capacity\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: 0.6Ω, 0.8Ω, 1.2Ω\u003c\/li\u003e\n\u003cli\u003eTop-fill design\u003c\/li\u003e\n\u003cli\u003eA refillable pod with a built-in coil, so there is no separate coil to install\u003c\/li\u003e\n\u003cli\u003eCompatibility: OXVA NeXLIM-series devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eResistance and e-liquid guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.6Ω:\u003c\/strong\u003e balanced RDTL or loose mouth-to-lung (MTL) use with 50VG\/50PG e-liquid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.8Ω:\u003c\/strong\u003e MTL use with 50VG\/50PG e-liquid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.2Ω:\u003c\/strong\u003e a tighter MTL draw with 50VG\/50PG e-liquid or an appropriate nic salt strength.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe NeXLIM cartridge uses a dual-mesh built-in coil.\u003c\/p\u003e\u003cp\u003eFor lower-powered MTL and RDTL pod options, a balanced 50VG\/50PG e-liquid is a reliable general starting point. Browse \u003ca href=\"\/collections\/nic-salts\"\u003enic salt e-liquids\u003c\/a\u003e and choose a nicotine strength suitable for the selected resistance and airflow.\u003c\/p\u003e\u003ch2\u003eFilling and replacement\u003c\/h2\u003e\u003cp\u003eOpen the top-fill port, fill to the 2ml limit and close the seal securely. With a new built-in coil or newly fitted replaceable coil, allow several minutes for the wick to saturate before vaping. Replace the complete pod when its built-in coil produces muted flavour, reduced vapour or a burnt taste.\u003c\/p\u003e\u003cp\u003eCheck the pod name and resistance carefully before ordering. Similar devices can use different cartridges. Browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement pods and cartridges\u003c\/a\u003e or compare \u003ca href=\"\/collections\/refillable-pod-kits\"\u003erefillable pod kits\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e3 × OXVA NeXLIM Pods in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"OXVA","offers":[{"title":"0.6 Ohms","offer_id":59910136660302,"sku":"IOV-000017","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohms","offer_id":59910136693070,"sku":"PODOXNXS0.083","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"1.2 Ohms","offer_id":59910136725838,"sku":"PODOXNXS1.203","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/oxva-nexlim-pods_fe7ad0d0-d74b-4c50-ae3f-08d0877072d8.png?v=1784964936"},{"product_id":"oxva-vprime-replacement-pods","title":"OXVA VPrime Replacement Pods","description":"\u003cp\u003eReplace a worn or damaged cartridge with OXVA VPrime Replacement Pods, designed for the OXVA VPrime pod kit. See \u003ca href=\"\/products\/oxva-vprime-vape-kit\"\u003eOXVA VPrime Vape Kit\u003c\/a\u003e for the compatible device. Each pod has a 2ml capacity and uses a top-fill design. This product is a refillable pod with a built-in coil, so there is no separate coil to install.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e2 replacement pods\u003c\/li\u003e\n\u003cli\u003e2ml e-liquid capacity\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: 0.2Ω, 0.4Ω, 0.6Ω, 0.8Ω\u003c\/li\u003e\n\u003cli\u003eTop-fill design\u003c\/li\u003e\n\u003cli\u003eA refillable pod with a built-in coil, so there is no separate coil to install\u003c\/li\u003e\n\u003cli\u003eCompatibility: The OXVA VPrime pod kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eResistance and e-liquid guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.2Ω:\u003c\/strong\u003e DTL use with lower-nicotine, higher-VG e-liquid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.4Ω:\u003c\/strong\u003e airier restricted-direct-to-lung (RDTL) or DTL use; follow the device power guidance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.6Ω:\u003c\/strong\u003e balanced RDTL or loose mouth-to-lung (MTL) use with 50VG\/50PG e-liquid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.8Ω:\u003c\/strong\u003e MTL use with 50VG\/50PG e-liquid.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor lower-powered MTL and RDTL pod options, a balanced 50VG\/50PG e-liquid is a reliable general starting point. Browse \u003ca href=\"\/collections\/nic-salts\"\u003enic salt e-liquids\u003c\/a\u003e and choose a nicotine strength suitable for the selected resistance and airflow.\u003c\/p\u003e\u003ch2\u003eFilling and replacement\u003c\/h2\u003e\u003cp\u003eOpen the top-fill port, fill to the 2ml limit and close the seal securely. With a new built-in coil or newly fitted replaceable coil, allow several minutes for the wick to saturate before vaping. Replace the complete pod when its built-in coil produces muted flavour, reduced vapour or a burnt taste.\u003c\/p\u003e\u003cp\u003eCheck the pod name and resistance carefully before ordering. Similar devices can use different cartridges. Browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement pods and cartridges\u003c\/a\u003e or compare \u003ca href=\"\/collections\/refillable-pod-kits\"\u003erefillable pod kits\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2 × OXVA VPrime Replacement Pods in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"OXVA","offers":[{"title":"0.2 Ohms","offer_id":59910175621454,"sku":"IOV-000001","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"0.4 Ohms","offer_id":59910175654222,"sku":"PODOXVPR0.402","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohms","offer_id":59910175686990,"sku":"IOV-000002","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohms","offer_id":59910175719758,"sku":"PODOXVPR0.802","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/oxva-vprime-replacement-pods_9b5b4a1c-d697-4c7c-9d0a-6dff8c95ea10.png?v=1781714818"},{"product_id":"aspire-pixo-pods","title":"Aspire Pixo Pods","description":"\u003cp\u003eThis replacement-pod option is made for Aspire Pixo-series devices and keeps the filling and coil system matched to the correct device. Each pod has a 2ml capacity and uses a top-fill or side-fill according to the selected TPD pod design. This product is a refillable pod with a built-in coil, so there is no separate coil to install.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e2 replacement pods\u003c\/li\u003e\n\u003cli\u003e2ml e-liquid capacity\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: 1.0Ω, 0.4Ω, 0.6Ω\u003c\/li\u003e\n\u003cli\u003eTop-fill or side-fill according to the selected TPD pod design\u003c\/li\u003e\n\u003cli\u003eA refillable pod with a built-in coil, so there is no separate coil to install\u003c\/li\u003e\n\u003cli\u003eCompatibility: Aspire Pixo-series devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eResistance and e-liquid guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.0Ω:\u003c\/strong\u003e a tighter MTL draw with 50VG\/50PG e-liquid or an appropriate nic salt strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.4Ω:\u003c\/strong\u003e airier restricted-direct-to-lung (RDTL) or DTL use; follow the device power guidance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.6Ω:\u003c\/strong\u003e balanced RDTL or loose mouth-to-lung (MTL) use with 50VG\/50PG e-liquid.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor lower-powered MTL and RDTL pod options, a balanced 50VG\/50PG e-liquid is a reliable general starting point. Browse \u003ca href=\"\/collections\/nic-salts\"\u003enic salt e-liquids\u003c\/a\u003e and choose a nicotine strength suitable for the selected resistance and airflow.\u003c\/p\u003e\u003ch2\u003eFilling and replacement\u003c\/h2\u003e\u003cp\u003eOpen the top-fill or side-fill according to the selected TPD pod port, fill to the 2ml limit and close the seal securely. With a new built-in coil or newly fitted replaceable coil, allow several minutes for the wick to saturate before vaping. Replace the complete pod when its built-in coil produces muted flavour, reduced vapour or a burnt taste.\u003c\/p\u003e\u003cp\u003eCheck the pod name and resistance carefully before ordering. Similar devices can use different cartridges. Browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement pods and cartridges\u003c\/a\u003e or compare \u003ca href=\"\/collections\/refillable-pod-kits\"\u003erefillable pod kits\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2 × Aspire Pixo Pods in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"Aspire","offers":[{"title":"1.0 Ohms","offer_id":59910190039374,"sku":"PODASPIX1.002","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"0.4 Ohms","offer_id":59910190072142,"sku":"PODASPIX0.042","price":6.99,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohms","offer_id":59910190104910,"sku":"IOV-000009","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/aspire-pixo-pods-1-ohm_ec704541-72a5-44e1-b6f0-8b2c7faa2cc3.png?v=1781714872"},{"product_id":"voopoo-vmate-pro-power-edition-vape-kit","title":"VooPoo Vmate Pro Power Edition Vape Kit","description":"\u003cp\u003eThe VooPoo VMATE Pro Power Edition is a slim, adjustable pod kit combining a 900mAh battery, 5–30W output and a 0.69-inch OLED screen. It includes two top-filling pods for mouth-to-lung (MTL) and restricted-direct-to-lung (RDTL) vaping, making it suitable for customers who want more control than a fixed-output pod.\u003c\/p\u003e\n\u003ch2\u003eVooPoo VMATE Pro Power Edition features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e900mAh built-in battery\u003c\/li\u003e\n\u003cli\u003eAdjustable 5–30W output\u003c\/li\u003e\n\u003cli\u003e0.69-inch OLED display\u003c\/li\u003e\n\u003cli\u003eStepless airflow control\u003c\/li\u003e\n\u003cli\u003eSmart childproof lock\u003c\/li\u003e\n\u003cli\u003e2ml VMATE Top Fill pods\u003c\/li\u003e\n\u003cli\u003e0.4Ω and 0.7Ω pods included\u003c\/li\u003e\n\u003cli\u003eCompatible with the VMATE pod family\u003c\/li\u003e\n\u003cli\u003eUSB-C 5V\/2A charging\u003c\/li\u003e\n\u003cli\u003eAluminium-alloy body\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVMATE pods and e-liquid\u003c\/h2\u003e\n\u003cp\u003eThe 0.4Ω pod supports 18–30W and is intended for an airier RDTL vape with freebase e-liquid. The 0.7Ω pod supports 15–25W and provides an MTL draw suitable for balanced 50VG\/50PG freebase or \u003ca href=\"\/collections\/nic-salts\"\u003enic salt e-liquids\u003c\/a\u003e. The device also supports compatible VMATE Top Fill and VMATE V2 pods, but the correct resistance and power requirement should be checked before ordering. Shop \u003ca href=\"\/products\/voopoo-vmate-top-fill-pods\"\u003eVooPoo VMATE Top Fill pods\u003c\/a\u003e for replacements.\u003c\/p\u003e\n\u003ch2\u003eControls, filling and charging\u003c\/h2\u003e\n\u003cp\u003eUse the side control to set power and adjust the airflow to tighten or loosen the draw. The OLED screen displays wattage, resistance, charge and puff information. The top-side fill port can be opened without removing the pod from the device. Let a new pod stand for several minutes after filling. VooPoo specifies 5V\/2A charging and states a fastest full-charge time of about 35 minutes under its test conditions.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOutput power: 5–30W\u003c\/li\u003e\n\u003cli\u003eBattery capacity: 900mAh\u003c\/li\u003e\n\u003cli\u003ePod capacity: 2ml\u003c\/li\u003e\n\u003cli\u003eDisplay: 0.69-inch OLED\u003c\/li\u003e\n\u003cli\u003eResistance range: 0.4–3.0Ω\u003c\/li\u003e\n\u003cli\u003eCharging: USB-C, 5V\/2A\u003c\/li\u003e\n\u003cli\u003eMaterials: aluminium alloy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eExplore more from the \u003ca href=\"\/collections\/voopoo\"\u003eVooPoo range\u003c\/a\u003e or compare other \u003ca href=\"\/collections\/refillable-pod-kits\"\u003erefillable pod kits\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat is included?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x VooPoo VMATE Pro Power Edition device\u003c\/li\u003e\n\u003cli\u003e1 x 2ml VMATE Top Fill pod, 0.4Ω\u003c\/li\u003e\n\u003cli\u003e1 x 2ml VMATE Top Fill pod, 0.7Ω\u003c\/li\u003e\n\u003cli\u003e1 x USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 x user manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VooPoo","offers":[{"title":"Neon","offer_id":59910210650446,"sku":"KITVPVMPPENO1","price":24.99,"currency_code":"GBP","in_stock":true},{"title":"Space Grey","offer_id":59910210683214,"sku":"KITVPVMPPESG1","price":24.99,"currency_code":"GBP","in_stock":true},{"title":"Dawn Blue","offer_id":59910210715982,"sku":"KITVPVMPPEDB1","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/voopoo-vmate-pro-power-edition-Neon_1cb63b45-8ea9-4eca-8a40-d4ae567d61bb.png?v=1781714902"},{"product_id":"voopoo-drag-5-vape-kit","title":"VooPoo Drag 5 Vape Kit","description":"\u003cp\u003eThe VooPoo Drag 5 is a dual-18650 box-mod kit capable of 5–177W output. Paired with the 2ml UFORCE-X tank and PnP X coils, it is designed primarily for experienced direct-to-lung (DTL) customers who want replaceable batteries, multiple power modes and a conventional 510-connected tank.\u003c\/p\u003e\n\u003ch2\u003eVooPoo Drag 5 features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable 5–177W output\u003c\/li\u003e\n\u003cli\u003eRequires two 18650 batteries, sold separately\u003c\/li\u003e\n\u003cli\u003eGENE.TT 2.0 chipset\u003c\/li\u003e\n\u003cli\u003eSmart, RBA, ECO and temperature-control modes\u003c\/li\u003e\n\u003cli\u003e0.96-inch TFT colour screen\u003c\/li\u003e\n\u003cli\u003e2ml UFORCE-X tank\u003c\/li\u003e\n\u003cli\u003eSlide top-filling system\u003c\/li\u003e\n\u003cli\u003eAdjustable top airflow\u003c\/li\u003e\n\u003cli\u003ePnP X coil compatibility\u003c\/li\u003e\n\u003cli\u003eUSB-C 5V\/3A charging support\u003c\/li\u003e\n\u003cli\u003eSmart C-frame battery cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUFORCE-X tank, coils and e-liquid\u003c\/h2\u003e\n\u003cp\u003eThe included 0.15Ω PnP X coil is rated for 60–80W and is intended for DTL vaping. The 0.3Ω option is rated for 32–40W and suits DTL or RDTL use. The UFORCE-X tank accepts the PnP X coil range and uses top air inlets to help reduce leakage. Use an appropriate 50–70% VG \u003ca href=\"\/collections\/e-liquids\"\u003ee-liquids\u003c\/a\u003e with the supplied coils; high-VG shortfills are normally the better match at the higher outputs.\u003c\/p\u003e\n\u003ch2\u003ePower, batteries and refilling\u003c\/h2\u003e\n\u003cp\u003eSmart mode matches a suitable power range to the installed coil, while RBA mode opens manual wattage control. ECO mode reduces power demand and temperature-control mode is available for compatible wire types. Push the tank top to expose the fill port, refill and close it fully. Prime every fresh coil before use. Two matched 18650 cells are required and are not included; follow the battery and charger manufacturers’ guidance and do not mix cells of different ages or types.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOutput power: 5–177W\u003c\/li\u003e\n\u003cli\u003eBattery: 2 x 18650 cells, not included\u003c\/li\u003e\n\u003cli\u003eTank capacity: 2ml\u003c\/li\u003e\n\u003cli\u003eConnection: 510\u003c\/li\u003e\n\u003cli\u003eCharging: USB-C, 5V\/3A\u003c\/li\u003e\n\u003cli\u003eIncluded coils: 0.15Ω and 0.3Ω PnP X\u003c\/li\u003e\n\u003cli\u003eFilling: slide top fill\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse the \u003ca href=\"\/collections\/voopoo\"\u003eVooPoo range\u003c\/a\u003e, find compatible \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement pods and coils\u003c\/a\u003e or shop \u003ca href=\"\/collections\/shortfill-e-liquids\"\u003eshortfill e-liquids\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat is included?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x VooPoo Drag 5 mod\u003c\/li\u003e\n\u003cli\u003e1 x 2ml UFORCE-X tank\u003c\/li\u003e\n\u003cli\u003e1 x 2ml spare glass\u003c\/li\u003e\n\u003cli\u003e1 x PnP X 0.15Ω coil\u003c\/li\u003e\n\u003cli\u003e1 x PnP X 0.3Ω coil\u003c\/li\u003e\n\u003cli\u003e1 x silicone seal pack\u003c\/li\u003e\n\u003cli\u003e1 x USB-C cable\u003c\/li\u003e\n\u003cli\u003e1 x user manual\u003c\/li\u003e\n\u003cli\u003e18650 batteries are not included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VooPoo","offers":[{"title":"Silver","offer_id":59910211699022,"sku":"KITVPDR5SLVR1","price":40.99,"currency_code":"GBP","in_stock":true},{"title":"Gradient Blue","offer_id":59910211731790,"sku":"KITVPDR5GRBL1","price":40.99,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":59910211764558,"sku":"KITVPDR5BLCK1","price":39.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/voopoo-drag-5-kit-silver_568745ac-13e8-4ac2-acb5-b40d539a427d.png?v=1781714904"},{"product_id":"oxva-xlim-v3-pods","title":"OXVA Xlim V3 Replacement Pods","description":"\u003cp\u003eReplace a worn or damaged cartridge with OXVA Xlim V3 Replacement Pods, designed for OXVA XLIM-series devices that accept XLIM V3 top-fill cartridges. Each pod has a 2ml capacity and uses a top-fill design. This product is a refillable pod with a built-in coil, so there is no separate coil to install.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3 replacement pods\u003c\/li\u003e\n\u003cli\u003e2ml e-liquid capacity\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: 0.4Ω, 0.6Ω, 0.8Ω, 1.2Ω\u003c\/li\u003e\n\u003cli\u003eTop-fill design\u003c\/li\u003e\n\u003cli\u003eA refillable pod with a built-in coil, so there is no separate coil to install\u003c\/li\u003e\n\u003cli\u003eCompatibility: OXVA XLIM-series devices that accept XLIM V3 top-fill cartridges\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eResistance and e-liquid guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.4Ω:\u003c\/strong\u003e airier restricted-direct-to-lung (RDTL) or DTL use; follow the device power guidance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.6Ω:\u003c\/strong\u003e balanced RDTL or loose mouth-to-lung (MTL) use with 50VG\/50PG e-liquid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.8Ω:\u003c\/strong\u003e MTL use with 50VG\/50PG e-liquid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.2Ω:\u003c\/strong\u003e a tighter MTL draw with 50VG\/50PG e-liquid or an appropriate nic salt strength.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor lower-powered MTL and RDTL pod options, a balanced 50VG\/50PG e-liquid is a reliable general starting point. Browse \u003ca href=\"\/collections\/nic-salts\"\u003enic salt e-liquids\u003c\/a\u003e and choose a nicotine strength suitable for the selected resistance and airflow.\u003c\/p\u003e\u003ch2\u003eFilling and replacement\u003c\/h2\u003e\u003cp\u003eOpen the top-fill port, fill to the 2ml limit and close the seal securely. With a new built-in coil or newly fitted replaceable coil, allow several minutes for the wick to saturate before vaping. Replace the complete pod when its built-in coil produces muted flavour, reduced vapour or a burnt taste.\u003c\/p\u003e\u003cp\u003eCheck the pod name and resistance carefully before ordering. Similar devices can use different cartridges. Browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement pods and cartridges\u003c\/a\u003e or compare \u003ca href=\"\/collections\/refillable-pod-kits\"\u003erefillable pod kits\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e3 × OXVA Xlim V3 Replacement Pods in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"OXVA","offers":[{"title":"0.4 Ohms","offer_id":59910223724878,"sku":"PODOXV30.403P","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohms","offer_id":59910223757646,"sku":"IOV-000018","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohms","offer_id":59910223790414,"sku":"PODOXV30.803P","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"1.2 Ohms","offer_id":59910223823182,"sku":"PODOXV31.203P","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/oxva-xlim-go-v3-pods_5de222c2-c6c3-4954-a922-58252e6c54f5.png?v=1781714935"},{"product_id":"elf-bar-elfx-pods","title":"Elfbar ELFX Pods","description":"\u003cp\u003eThis replacement-pod option is made for Elfbar ELFX and ELFX Pro pod kits and keeps the filling and coil system matched to the correct device. Each pod has a 2ml capacity and uses a top-fill design. This product is a refillable pod with a built-in coil, so there is no separate coil to install.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3 replacement pods\u003c\/li\u003e\n\u003cli\u003e2ml e-liquid capacity\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: 0.6Ω, 0.8Ω\u003c\/li\u003e\n\u003cli\u003eTop-fill design\u003c\/li\u003e\n\u003cli\u003eA refillable pod with a built-in coil, so there is no separate coil to install\u003c\/li\u003e\n\u003cli\u003eCompatibility: Elfbar ELFX and ELFX Pro pod kits\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eResistance and e-liquid guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.6Ω:\u003c\/strong\u003e balanced RDTL or loose mouth-to-lung (MTL) use with 50VG\/50PG e-liquid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.8Ω:\u003c\/strong\u003e MTL use with 50VG\/50PG e-liquid.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe built-in QUAQ mesh coil removes the need for a separate coil change.\u003c\/p\u003e\u003cp\u003eFor lower-powered MTL and RDTL pod options, a balanced 50VG\/50PG e-liquid is a reliable general starting point. Browse \u003ca href=\"\/collections\/nic-salts\"\u003enic salt e-liquids\u003c\/a\u003e and choose a nicotine strength suitable for the selected resistance and airflow.\u003c\/p\u003e\u003ch2\u003eFilling and replacement\u003c\/h2\u003e\u003cp\u003eOpen the top-fill port, fill to the 2ml limit and close the seal securely. With a new built-in coil or newly fitted replaceable coil, allow several minutes for the wick to saturate before vaping. Replace the complete pod when its built-in coil produces muted flavour, reduced vapour or a burnt taste.\u003c\/p\u003e\u003cp\u003eCheck the pod name and resistance carefully before ordering. Similar devices can use different cartridges. Browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement pods and cartridges\u003c\/a\u003e or compare \u003ca href=\"\/collections\/refillable-pod-kits\"\u003erefillable pod kits\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e3 × Elfbar ELFX Pods in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"Elfbar","offers":[{"title":"0.6 Ohms","offer_id":59910225199438,"sku":"IOV-000003","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohms","offer_id":59910225232206,"sku":"PODELFXP0.803","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/Elfbar-ELFX-Refillable-Pod_5e058451-1d66-41e6-855f-0fe9bb0e76ef.png?v=1781714938"},{"product_id":"eleaf-ep-replacement-coils","title":"Eleaf EP Replacement Coils","description":"\u003cp\u003eKeep a compatible setup performing correctly with Eleaf EP Replacement Coils, made for Eleaf EP pods and compatible devices such as the iJust AIO Pro. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 5 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: 0.15Ω (55–80W), 0.6Ω (18–26W), 1.2Ω (10–15W)\u003c\/li\u003e\n\u003cli\u003eCompatibility: Eleaf EP pods and compatible devices such as the iJust AIO Pro\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e0.15Ω: DTL, 55–80W\u003c\/li\u003e\n\u003cli\u003e0.6Ω: RDTL, 18–26W\u003c\/li\u003e\n\u003cli\u003e1.2Ω: MTL, 10–15W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThe lower-resistance option gives a warmer, airier draw, while the higher-resistance option provides a tighter vape at lower power. Use 50VG\/50PG liquid for MTL options and follow the device guidance before using higher-VG liquid. Browse \u003ca href=\"\/collections\/nic-salts\"\u003enic salt e-liquids\u003c\/a\u003e for suitable lower-powered setups.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e5 × Eleaf EP Replacement Coils in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"Eleaf","offers":[{"title":"Default Title","offer_id":59910235095374,"sku":"COLELFEP0.155","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/eleaf-ep-replacement-coils-pack-of-5-015ohm_0166d827-df53-4b18-93db-5cab0a968cc9.png?v=1781714965"},{"product_id":"smok-vape-pen-v2-dc-replacement-coils","title":"SMOK Vape Pen V2 DC Replacement Coils","description":"\u003cp\u003eSMOK Vape Pen V2 DC Replacement Coils are replacement coils for the SMOK Vape Pen V2 kit. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 5 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: 0.6Ω DC coil\u003c\/li\u003e\n\u003cli\u003eCompatibility: The SMOK Vape Pen V2 kit\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003cli\u003eMesh construction where stated for the selected option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e0.6Ω DC option for the SMOK Vape Pen V2; use the fixed-output device as instructed\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThe lower-resistance option gives a warmer, airier draw, while the higher-resistance option provides a tighter vape at lower power. Use 50VG\/50PG liquid for MTL options and follow the device guidance before using higher-VG liquid. Browse \u003ca href=\"\/collections\/nic-salts\"\u003enic salt e-liquids\u003c\/a\u003e for suitable lower-powered setups.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e5 × SMOK Vape Pen V2 DC Replacement Coils in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"SMOK","offers":[{"title":"Default Title","offer_id":59910258557262,"sku":"SMVPDC06","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/smok-vape-pen-v2-coils-0_6-ohms-dc-pack-of-5_edcd6cbf-f264-4e3f-adc8-c8b1dc00d148.png?v=1781715009"},{"product_id":"uwell-crown-m-replacement-coils-pack-of-4","title":"Uwell Crown M Replacement Coils (Pack of 4)","description":"\u003cp\u003eThis pack of 4 coils is intended for the Uwell Crown M pod kit and lets you replace a worn coil without replacing the complete tank or pod. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 4 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: 0.6Ω, Twin 0.4\/0.8Ω\u003c\/li\u003e\n\u003cli\u003eCompatibility: The Uwell Crown M pod kit\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003cli\u003eMesh construction where stated for the selected option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e0.6Ω option: tighter output\u003c\/li\u003e\n\u003cli\u003e0.4Ω\/0.8Ω twin-coil option: use the Crown M device mode and airflow recommended for the selected configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMesh construction is used to spread heat across a larger surface area.\u003c\/p\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThe lower-resistance option gives a warmer, airier draw, while the higher-resistance option provides a tighter vape at lower power. Use 50VG\/50PG liquid for MTL options and follow the device guidance before using higher-VG liquid. Browse \u003ca href=\"\/collections\/nic-salts\"\u003enic salt e-liquids\u003c\/a\u003e for suitable lower-powered setups.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e4 × Uwell Crown M Replacement Coils in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"Uwell","offers":[{"title":"0.6 Ohms","offer_id":59910288376142,"sku":"COLUWMCO0.604","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"Twin 0.4\/0.8 Ohms","offer_id":59910288408910,"sku":"COLUWMTC0.804","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/uwell-crown-m-replacement-coils-pack-of-4_22dc2e08-551f-4738-aa91-eb0c9b17b8ae.png?v=1781715041"},{"product_id":"voopoo-vinci-v2-replacement-pods-pack-of-3","title":"Voopoo Vinci V2 Replacement Pods (Pack of 3)","description":"\u003cp\u003eThis replacement-pod option is made for VooPoo Vinci Pod, Vinci Q, Vinci SE and Drag Nano 2 devices that accept Vinci V2 pods and keeps the filling and coil system matched to the correct device. Each pod has a 2ml capacity and uses a top-fill design. This product is a refillable pod with a built-in coil, so there is no separate coil to install.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3 replacement pods\u003c\/li\u003e\n\u003cli\u003e2ml e-liquid capacity\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: 0.8Ω, 1.2Ω\u003c\/li\u003e\n\u003cli\u003eTop-fill design\u003c\/li\u003e\n\u003cli\u003eA refillable pod with a built-in coil, so there is no separate coil to install\u003c\/li\u003e\n\u003cli\u003eCompatibility: VooPoo Vinci Pod, Vinci Q, Vinci SE and Drag Nano 2 devices that accept Vinci V2 pods\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eResistance and e-liquid guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.8Ω:\u003c\/strong\u003e MTL use with 50VG\/50PG e-liquid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.2Ω:\u003c\/strong\u003e a tighter MTL draw with 50VG\/50PG e-liquid or an appropriate nic salt strength.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor lower-powered MTL and RDTL pod options, a balanced 50VG\/50PG e-liquid is a reliable general starting point. Browse \u003ca href=\"\/collections\/nic-salts\"\u003enic salt e-liquids\u003c\/a\u003e and choose a nicotine strength suitable for the selected resistance and airflow.\u003c\/p\u003e\u003ch2\u003eFilling and replacement\u003c\/h2\u003e\u003cp\u003eOpen the top-fill port, fill to the 2ml limit and close the seal securely. With a new built-in coil or newly fitted replaceable coil, allow several minutes for the wick to saturate before vaping. Replace the complete pod when its built-in coil produces muted flavour, reduced vapour or a burnt taste.\u003c\/p\u003e\u003cp\u003eCheck the pod name and resistance carefully before ordering. Similar devices can use different cartridges. Browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement pods and cartridges\u003c\/a\u003e or compare \u003ca href=\"\/collections\/refillable-pod-kits\"\u003erefillable pod kits\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e3 × Voopoo Vinci V2 Replacement Pods in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"VooPoo","offers":[{"title":"0.8 Ohms","offer_id":59910292635982,"sku":"PODVPVV20.803","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"1.2 Ohms","offer_id":59910292668750,"sku":"PODVPVV21.203","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/voopoo-vinci-series-v2-replacement-pods-08ohms-pack-of-3_a78fa340-7ab9-4bb5-860f-329db24352c6.webp?v=1781715045"},{"product_id":"vaporesso-gti-mesh-replacement-coils-pack-of-5","title":"Vaporesso GTi Mesh Replacement Coils (Pack of 5)","description":"\u003cp\u003eKeep a compatible setup performing correctly with Vaporesso GTi Mesh Replacement Coils, made for Vaporesso iTank and other products built around the GTi coil platform. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 5 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: 0.15Ω, 0.2Ω, 0.4Ω, 0.5Ω\u003c\/li\u003e\n\u003cli\u003eCompatibility: Vaporesso iTank and other products built around the GTi coil platform\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003cli\u003eMesh construction where stated for the selected option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e0.15Ω: 75–90W; best 85W\u003c\/li\u003e\n\u003cli\u003e0.2Ω: 60–75W; best 65W\u003c\/li\u003e\n\u003cli\u003e0.4Ω: 50–60W; best 55W\u003c\/li\u003e\n\u003cli\u003e0.5Ω: 30–40W; best 35W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThe lower-resistance option gives a warmer, airier draw, while the higher-resistance option provides a tighter vape at lower power. Use 50VG\/50PG liquid for MTL options and follow the device guidance before using higher-VG liquid. Browse \u003ca href=\"\/collections\/nic-salts\"\u003enic salt e-liquids\u003c\/a\u003e for suitable lower-powered setups.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e5 × Vaporesso GTi Mesh Replacement Coils in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"Vaporesso","offers":[{"title":"0.15 Ohms","offer_id":59910298534222,"sku":"VAPORESSO-GTI-MCOILS-5PK-0.15OHMS","price":14.99,"currency_code":"GBP","in_stock":true},{"title":"0.2 Ohms","offer_id":59910298566990,"sku":"IOV-000005","price":14.99,"currency_code":"GBP","in_stock":true},{"title":"0.4 Ohms","offer_id":59910298599758,"sku":"IOV-000004","price":14.99,"currency_code":"GBP","in_stock":true},{"title":"0.5 Ohms","offer_id":59910298632526,"sku":"VAPORESSO-GTI-MCOILS-5PK-0.5OHMS","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/vaporesso-gti-mesh-replacement-coils-pack-of-5_6d670d29-22bb-4b35-8568-9656616f873e.jpg?v=1781715071"},{"product_id":"aspire-flexus-af-replacement-mesh-coils-pack-of-5","title":"Aspire Flexus AF Replacement Mesh Coils (Pack of 5)","description":"\u003cp\u003eAspire Flexus AF Replacement Mesh Coils are replacement coils for Aspire AF-coil products, including Flexus Q, Flexus Pro, Flexus AIO and the Aspire AF Tank. Check the exact device through \u003ca href=\"\/products\/aspire-flexus-q-pod-vape-kit\"\u003eAspire Flexus Q Pod Vape Kit\u003c\/a\u003e before ordering. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 5 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: 0.4Ω, 0.6Ω, 1.0Ω\u003c\/li\u003e\n\u003cli\u003eCompatibility: Aspire AF-coil products, including Flexus Q, Flexus Pro, Flexus AIO and the Aspire AF Tank\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003cli\u003eMesh construction where stated for the selected option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e0.4Ω: 20–28W\u003c\/li\u003e\n\u003cli\u003e0.6Ω: 15–18W\u003c\/li\u003e\n\u003cli\u003e1.0Ω: 12–15W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThe lower-resistance option gives a warmer, airier draw, while the higher-resistance option provides a tighter vape at lower power. Use 50VG\/50PG liquid for MTL options and follow the device guidance before using higher-VG liquid. Browse \u003ca href=\"\/collections\/nic-salts\"\u003enic salt e-liquids\u003c\/a\u003e for suitable lower-powered setups.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e5 × Aspire Flexus AF Replacement Mesh Coils in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"Aspire","offers":[{"title":"0.4 Ohms","offer_id":59910309183822,"sku":"COLASFLQ0.045","price":13.99,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohms","offer_id":59910309216590,"sku":"ASPIRE-FLEXUS-Q-COILS-5PK-MESH-0.6OHMS","price":11.99,"currency_code":"GBP","in_stock":true},{"title":"1.0 Ohms","offer_id":59910309249358,"sku":"ASPIRE-FLEXUS-Q-COILS-5PK-MESH-1.0OHMS","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/aspire-flexus-q-replacement-mesh-coils-0_6-ohms-pack-of-5_df79ae04-a0ce-4a4f-949d-8845a6c147e6.png?v=1781715096"},{"product_id":"ub-lite-replacement-coils-pack-of-5","title":"UB Lite Replacement Coils (Pack of 5)","description":"\u003cp\u003eThis pack of 5 coils is intended for Lost Vape UB Lite pods and devices and lets you replace a worn coil without replacing the complete tank or pod. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 5 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: L1 0.4Ω\u003c\/li\u003e\n\u003cli\u003eCompatibility: Lost Vape UB Lite pods and devices\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003cli\u003eMesh construction where stated for the selected option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eThe current Shopify option is the L1 0.4Ω coil, intended for a looser RDTL-style draw\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThese low-resistance options are intended for airier direct-to-lung (DTL) use. Pair them with a lower-nicotine, higher-VG e-liquid and follow the wattage range printed on the coil.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e5 × UB Lite Replacement Coils in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"Lost Vape","offers":[{"title":"L1 0.4 Ohms","offer_id":59910331662670,"sku":"LOSTVAPE-UB-LITE-COILS-5PK-0.4OHMS","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/lost-vape-ub-lite-l1-coils-pack-of-5_5f301c3a-ff20-4877-81bf-c654182b769d.jpg?v=1781715176"},{"product_id":"voopoo-tpp-replacement-mesh-coils-pack-of-3","title":"VooPoo TPP Replacement Mesh Coils (Pack of 3)","description":"\u003cp\u003eKeep a compatible setup performing correctly with VooPoo TPP Replacement Mesh Coils, made for VooPoo TPP-compatible pods and pod tanks. TPP coils are a separate platform from VooPoo PnP coils. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 3 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: Type: DM1 0.15Ω, DM2 0.2Ω, DM3 0.15Ω, DM4 0.3Ω\u003c\/li\u003e\n\u003cli\u003eCompatibility: VooPoo TPP-compatible pods and pod tanks. TPP coils are a separate platform from VooPoo PnP coils\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003cli\u003eMesh construction where stated for the selected option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDM1 0.15Ω: 60–80W; best 65–75W\u003c\/li\u003e\n\u003cli\u003eDM2 0.2Ω: 40–60W; best 50–55W\u003c\/li\u003e\n\u003cli\u003eDM3 0.15Ω: 80–100W; best 85–95W\u003c\/li\u003e\n\u003cli\u003eDM4 0.3Ω: 32–40W; best around 35W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThese low-resistance options are intended for airier direct-to-lung (DTL) use. Pair them with a lower-nicotine, higher-VG e-liquid and follow the wattage range printed on the coil.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e3 × VooPoo TPP Replacement Mesh Coils in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"VooPoo","offers":[{"title":"DM1 0.15 OHMS","offer_id":59910335234382,"sku":"VOOPOO-TPP-DM1-COILS-3PK-0.15OHMS","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"DM2 0.2 OHMS","offer_id":59910335267150,"sku":"VOOPOO-TPP-DM2-COILS-3PK-0.2OHMS","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"DM3 0.15 OHMS","offer_id":59910335299918,"sku":"IOV-000008","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"DM4 0.3 OHMS","offer_id":59910335332686,"sku":"VOOPOO-TPP-DM4-COILS-3PK-0.3OHMS","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/voopoo-tpp-replacement-mesh-coils-dm2-pack-of-3_8361d9ad-3692-41a3-9cf1-0b3d7128b474.jpg?v=1781715191"},{"product_id":"smok-rpm-2-replacement-coils-pack-of-5","title":"SMOK RPM 2 Replacement Coils (Pack of 5)","description":"\u003cp\u003eSMOK RPM 2 Replacement Coils are replacement coils for SMOK pods and devices made for the RPM 2 coil platform, including the RPM 2 and SCAR-P3\/P5 ranges. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 5 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: 0.16Ω mesh, 0.23Ω mesh, 0.60Ω MTL\u003c\/li\u003e\n\u003cli\u003eCompatibility: SMOK pods and devices made for the RPM 2 coil platform, including the RPM 2 and SCAR-P3\/P5 ranges\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003cli\u003eMesh construction where stated for the selected option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e0.16Ω and 0.23Ω mesh: airier DTL use with lower-nicotine, higher-VG e-liquid\u003c\/li\u003e\n\u003cli\u003e0.6Ω: tighter MTL use with balanced 50VG\/50PG e-liquid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThe lower-resistance option gives a warmer, airier draw, while the higher-resistance option provides a tighter vape at lower power. Use 50VG\/50PG liquid for MTL options and follow the device guidance before using higher-VG liquid. Browse \u003ca href=\"\/collections\/nic-salts\"\u003enic salt e-liquids\u003c\/a\u003e for suitable lower-powered setups.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e5 × SMOK RPM 2 Replacement Coils in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"SMOK","offers":[{"title":"0.16 Ohms Mesh","offer_id":59910340968782,"sku":"SMOK-RPM2-COILS-PK5-MESH-0.16OHMS","price":13.99,"currency_code":"GBP","in_stock":true},{"title":"0.23 Ohms Mesh","offer_id":59910341001550,"sku":"COLSKRP20.235","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"0.60 Ohms MTL","offer_id":59910341034318,"sku":"SMOK-RPM2-COILS-PK5-MTL-0.6OHMS","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/smok-rpm2-coils-016ohms-mesh-pack-of-5_7c3a6574-f825-4197-a375-6df2e6696f74.jpg?v=1781715213"},{"product_id":"aspire-pockex-replacement-coils-pack-of-5","title":"Aspire PockeX Coils (Pack of 5)","description":"\u003cp\u003eKeep a compatible setup performing correctly with Aspire PockeX Coils, made for the Aspire PockeX starter kit. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 5 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: 0.6Ω, 1.2Ω\u003c\/li\u003e\n\u003cli\u003eCompatibility: The Aspire PockeX starter kit\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e0.6Ω: warmer, airier output in the PockeX\u003c\/li\u003e\n\u003cli\u003e1.2Ω: tighter MTL draw and lower vapour output\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThe lower-resistance option gives a warmer, airier draw, while the higher-resistance option provides a tighter vape at lower power. Use 50VG\/50PG liquid for MTL options and follow the device guidance before using higher-VG liquid. Browse \u003ca href=\"\/collections\/nic-salts\"\u003enic salt e-liquids\u003c\/a\u003e for suitable lower-powered setups.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e5 × Aspire PockeX Coils in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"Aspire","offers":[{"title":"0.6 Ohms","offer_id":59910345589070,"sku":"IOV-000007","price":11.99,"currency_code":"GBP","in_stock":true},{"title":"1.2 Ohms","offer_id":59910345621838,"sku":"ASPIRE-POCKEX-COILS-1.2OHM","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/ASPIRE-POCKEX-COILS-_PACK-OF-5_04d92d73-007a-4dff-aa48-bd1e4efad6a2.jpg?v=1781715229"},{"product_id":"aspire-nautilus-coils-pack-of-5","title":"Aspire Nautilus Coils (Pack of 5)","description":"\u003cp\u003eAspire Nautilus Coils are replacement coils for Aspire tanks and kits built around the Nautilus coil platform. Compatibility varies by coil resistance and tank generation, so check the resistance supported by your exact tank before ordering. Select the resistance that matches your device, preferred draw and recommended power range.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePack of 5 replacement coils\u003c\/li\u003e\n\u003cli\u003eCurrent options: Resistance: 0.7Ω mesh, 1.0Ω mesh, 0.7Ω, 1.6Ω, 1.8Ω, 0.3Ω mesh, 1.8Ω - Salt, 0.4Ω\u003c\/li\u003e\n\u003cli\u003eCompatibility: Aspire tanks and kits built around the Nautilus coil platform. Compatibility varies by coil resistance and tank generation, so check the resistance supported by your exact tank before ordering\u003c\/li\u003e\n\u003cli\u003eReplaceable coil design for the stated compatible tank or pod\u003c\/li\u003e\n\u003cli\u003eMesh construction where stated for the selected option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich coil should I choose?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e0.3Ω mesh: 23–28W\u003c\/li\u003e\n\u003cli\u003e0.4Ω: 23–28W\u003c\/li\u003e\n\u003cli\u003e0.7Ω standard: 18–23W\u003c\/li\u003e\n\u003cli\u003e0.7Ω mesh: 20–25W\u003c\/li\u003e\n\u003cli\u003e1.0Ω mesh: 13–15W\u003c\/li\u003e\n\u003cli\u003e1.6Ω BVC: 7–11W\u003c\/li\u003e\n\u003cli\u003e1.8Ω BVC: 10–14W\u003c\/li\u003e\n\u003cli\u003e1.8Ω NS: use only with equipment that specifically supports the Nautilus AIO NS coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and e-liquid guidance\u003c\/h2\u003e\u003cp\u003eThe lower-resistance option gives a warmer, airier draw, while the higher-resistance option provides a tighter vape at lower power. Use 50VG\/50PG liquid for MTL options and follow the device guidance before using higher-VG liquid. Browse \u003ca href=\"\/collections\/nic-salts\"\u003enic salt e-liquids\u003c\/a\u003e for suitable lower-powered setups.\u003c\/p\u003e\u003cp\u003eDo not assume that a similarly named coil range will fit. Confirm the platform name and resistance before ordering, or browse more \u003ca href=\"\/collections\/coils-cartridges\"\u003ereplacement coils and cartridges\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFitting and priming\u003c\/h2\u003e\u003cp\u003eRemove the used coil and fit the replacement securely using the method specified for your tank or pod. After filling, leave a new coil for several minutes so the wick can absorb e-liquid. Begin at the lower end of the printed wattage range and increase gradually. Replace the coil when flavour becomes muted, vapour drops or a burnt taste develops.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e5 × Aspire Nautilus Coils in your selected option\u003c\/li\u003e\u003c\/ul\u003e","brand":"Aspire","offers":[{"title":"0.7 Ohms MESH","offer_id":59910346867022,"sku":"IOV-000012","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"1.0 Ohms MESH","offer_id":59910346899790,"sku":"ASPIRE-NAUTILUS-MESH-COILS-1.0OHMS","price":11.99,"currency_code":"GBP","in_stock":true},{"title":"0.7 Ohms","offer_id":59910346932558,"sku":"ASPIRE-NAUTILUS-COILS-0.7-OHMS","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"1.6 Ohms","offer_id":59910346965326,"sku":"ASPIRE-NAUTILUS-COILS-1.6-OHMS","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"1.8 Ohms","offer_id":59910346998094,"sku":"IOV-000011","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.3 Ohms MESH","offer_id":59910347030862,"sku":"ASPIRE-NAUTILUS-MESH-COILS-0.3-OHMS","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"1.8 Ohms - Salt","offer_id":59910347063630,"sku":"ASPIRE-NAUTILUS-COILS-1.8-OHMS-SALT","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.4 Ohms","offer_id":59910347096398,"sku":"ASPIRE-NAUTILUS-2S-COILS-0.4OHMS","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1047\/3671\/9182\/files\/aspire-nautilus-coils-pack-of-5-0_7-ohms-mesh_ea7b9ec8-5f5b-4825-ac73-15d218f60584.png?v=1781715234"}],"url":"https:\/\/isleofvapes.co.uk\/collections\/sub-ohm-coils.oembed","provider":"Isle of Vapes","version":"1.0","type":"link"}